The usage of Bricks or Pavers to develop a pathway or patio complements a house in a way that is unrivaled. In addition, setting up a Brick or Paver sidewalk does not necessarily require a pro.
The key to setting up a Brick or Paver Walkway is to first properly prepare the area where the bricks/pavers are to be set up. In addition, string lines need to be strung on each side of the pathway.
As soon as the location has been dug down, 3/4" gravel stone should be laid in and tamped down firmly. Then 2" of sand, or stone dust must be topped the gravel. Again the sand/stone dust must be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline need to equal the thickness of the brick or paver.
Now that you have a stable base, put a 1" pipeline or ledger board the length of the walkway on either side of the pathway. Using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.
Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready area. These strips will act as your pathway border and aid to maintain the integrity and shape of the sidewalk.
The key to laying the bricks/pavers is to guarantee that they clay bricks interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the stability of the pathway.
Inevitably bricks/pavers will require to be cut or divided when developing the sidewalk. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.
After installing the bricks, develop the outside edges with extra sand, and then shovel in the topsoil and pack down strongly.
Finally, spread stone dust over the brand-new sidewalk and sweep into the cracks. Repeat this process a number of times to make sure the cracks are totally filled. This will finish the interlocking of the bricks and help to get rid of any weed development. Just include yard seed to the outdoors edges and you must have a gorgeous entryway to your house within a couple of weeks.
In addition, setting up a Brick or Paver pathway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, place a 1" pipeline here or ledger board the length of the sidewalk on either side of the pathway. These strips will act as your sidewalk border and help to maintain the integrity and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or split when developing the pathway.